Skip to Content
Remote Water Shut-Off Valves

Shut off. Turn on.
Without a truck roll.

A remote shut-off valve at the meter lets your office disconnect, reconnect or cut a service to a trickle the same day. Collections get easier, move-ins get faster, and a leak at an empty house gets stopped before it becomes a claim.

5 positionsTrickle-flow optionNSF/ANSI 61 lead-freeIP681/2 to 1 inch
2
truck trips per manual disconnect and reconnect
$50-$75
typical cost of one truck roll
0
trips with a remote valve
1-2 gpm
trickle flow at 60 psi instead of a full cut-off

Truck roll cost: WaterWorld, "Remote Disconnect Metering."

Where it pays

Six jobs one valve handles.

Payment enforcementDisconnect on schedule. Restore the same day the account is paid, without a second trip.
Move-ins and move-outsHandle service changes from the office instead of adding stops to a crew's route.
Vacant and seasonal leaksA leak alarm at an empty property? Close the valve from your desk.
Conservation rulesHold an account to reduced flow during restrictions instead of shutting it off.
Trickle, not cut-offWhere a full disconnect isn't allowed or isn't right, leave water for basic needs at about 1 to 2 gpm.
Safer crewsFewer door-side disconnects, fewer miles, less overtime.
Start small

You don't need valves everywhere.

Most of the payback comes from a small share of accounts: the ones you cycle on and off every month or quarter. Put valves there first.

1
Pull your listFind the services your crews disconnect and reconnect most often.
2
Install at the meterA swivel nut mounts the valve directly to the meter. Our crews can set it during a meter change.
3
Control it from the officeThe valve plugs into the second port of a cellular AMI endpoint. No collectors, so a program can start with a handful of services.
Built for the pit

The details.

Five positionsOpen, closed and three reduced-flow settings you can set for your own programs.
Brass body, stainless ballNSF/ANSI 61 lead-free. 150 psi max, -22 to 140 °F.
1/2, 3/4 and 1 inchMale and female swivel nut. Fits 5/8 through 1 inch residential meters.
IP68Rated for submersion in a flooded pit.
Long battery designLithium battery designed for about 20 years at two position changes a month.
Body now, control laterThe actuator services separately, so you can set the valve body during a meter change and add control when you need it.
Questions

Remote shut-off valve FAQ.

How does a remote water shut-off valve work?

The valve installs at the meter and connects to a cellular AMI endpoint. Your office sends open, close or reduced-flow commands from its meter data software, and the endpoint carries them to the valve.

Can I reduce flow instead of shutting water off?

Yes. The valve has five positions, including a trickle setting of about 1 to 2 gpm at 60 psi for accounts that should not be fully disconnected.

How many valves should a utility start with?

Start with the accounts you disconnect and reconnect most often. That small group usually delivers most of the savings.

Do I need a fixed AMI network?

No. The valve runs through a cellular endpoint, so there are no collectors or towers to build.

Will it fit my meters?

Valves come in 1/2, 3/4 and 1 inch with a swivel nut that mounts directly to 5/8 through 1 inch residential meters.

Cut the truck rolls. Keep the revenue.

Tell us how many disconnects and service changes you handle each month.