Skip to Content
Sensus® FlexNet® Utilities

On FlexNet® and miss the all-brass SR® II?
Get the workhorse back.

Want a low-maintenance meter with a documented 25+ year new-meter accuracy service life? RG3’s American-made, heavy-duty brass PD meter has an SR® II chamber, 100% silicone seals and gaskets that make it chloramine-proof, and no battery in the encoder to fail. It’s touch-read reliability, under your Sensus FlexNet® SmartPoint®.

All-Brass Body AvailableChloramine-Resistant SealsMade in the USANo Encoder Battery25+ Year PD Service LifeSmartPoint® Ready
0012Perpetual PD Touch CouplerSensus-compatible SmartPoint®your FlexNet® network Sensus-approvedOptical Encoder PLUG IN. READ ON FLEXNET®. RG3 is not affiliated with Sensus. Trademarks belong to their owners.
25+ yr
documented PD field service life
10 yr
accuracy warranty
0
batteries in the Optical Encoder
USA
manufactured, assembled and tested
Brass, not plastic

Remember the touch-read meters that never quit?

Sensus moved its residential line to composite. The standard iPERL® main case and threads are composite, and cross-threaded composite threads are a common complaint from field crews. It is an all-electronic meter on a sealed battery: when the battery goes flat, the meter is done, and its accuracy rides on the electronics.

Brass PD meters with a touchpad ran for decades with almost no maintenance. The Perpetual is built the same way, and better: a patented boltless brass body that keeps the measuring chamber true and extends service life, a 10-year new-meter accuracy warranty, silicone seals that stand up to chloramine, no battery in the encoder, and a 25+ year documented PD service life. Made in the USA. Same touch coupler read, under your FlexNet®.

RG3 PerpetualSensus iPERL®
Body Brass main case, brass bottom availableComposite main case and threads
How it measures Positive displacement, SR® II style pistonElectromagnetic
Battery None in the encoderSealed, 20-year spec in North America
FlexNet® Sensus-approved encoder for SmartPoint®Yes
Made in USA—

iPERL body and battery: Sensus iPERL North America data sheet. Not affiliated with Sensus.

For skeptical operators and engineers

Think PD can’t match a static meter at 5/8 x 3/4?

In a 15-year side-by-side study in Olathe, Kansas, an iPERL® and a Sensus SR® II PD meter registered within 0.19% of each other. Same accuracy. And American Water’s field data shows PD meters holding new-meter accuracy for 25 years. That’s 25 years proven in the field, versus the iPERL’s 20-year North American battery claim. Not a sales pitch. It actually happened. Backed by a 10-year new-meter accuracy warranty. See the field data.

The workhorse

Built like the meters that lasted forever.

Tough brass

Brass main case with no bolts to bend the chamber. Brass bottom available.

American made

Manufactured, assembled and tested in the USA.

No encoder battery

Nothing inside the encoder to run down at year 20.

Easy to read

Clear wheel register for a quick visual read, plus the touchpad your crews already know.

Chloramine-resistant

100% silicone seals, not nitrile.

25+ year service life

Field data shows PD meters testing near 100% accuracy past year 25.

Low maintenance

No battery change-outs. Set it, read it, forget it.

Under your FlexNet®

Sensus-approved encoder for SmartPoint® radios.

RG3 Perpetual PD water meter with Sensus-approved Optical Encoder and Sensus-compatible touch coupler
Plug and Play

Same network. Better meter.

  • Sensus-approved RG3 Optical Encoder, approved for SmartPoint® radios
  • Sensus-compatible touch coupler (part EP-TRPL), ready to plug in
  • RG3 Perpetual PD meter, 5/8, 3/4 and 1 inch, low lead
  • SR® II style oscillating piston chamber in a boltless brass case
  • All-silicone seals that stand up to chloramine
  • Available with a single check for backflow prevention
Shop Online

Order tough brass meters by the box.

MIG is a master distributor for RG3 Meter Company. Perpetual PD meters with the Sensus-approved Optical Encoder and touch coupler, ready for SmartPoint®. See pricing and order in the MIG shop.

Water

5/8 x 1/2 in

Perpetual PD, Optical Encoder, touch coupler

Water

5/8 x 3/4 in

Perpetual PD, Optical Encoder, touch coupler

Water

1 in

Perpetual PD, Optical Encoder, touch coupler

Quote

Pallets and options

Pallet pricing, brass or cast iron bottoms, cubic foot registers, single check valves.

Try one for $49.Qualified utilities can get their first sample meter for $49 to test on their own FlexNet® system. One per utility.
Request a $49 Sample

MIG and RG3 are not affiliated with Sensus. Trademarks belong to their owners.

Documented, not claimed

The 25-year meter.

American Water's field data from Kansas City Water Services tested in-service PD meters out to 30 years. Most still tested near 100% accuracy past year 25.

A static meter runs on a sealed battery. When the battery is done, the meter is done. The Perpetual's Optical Encoder has no battery to run out.

0.19%
iPERL vs. Sensus SR II PD, side by side, 15 years. Essentially identical.
10 / 25
Perpetual: 10-yr new-meter accuracy warranty, 25-yr main case warranty.
PD meter, field data (American Water / KC Water Services)25+ yrStatic meter battery spec, North America (Sensus iPERL)20 yrStatic meter battery spec, international (Sensus iPERL)15 yrScale: 0 to 25 years. Battery end of life ends the static meter.

Sources: Hughes, D. (American Water), "Getting Smarter with Advanced Metering Infrastructure," Bentley Be Conference, May 19, 2010, Slide 9, data courtesy Kansas City Water Services Dept. Hannah, C.C., P.E., Static Meter Research Project, Johnson Controls, Q2 2026 update, Olathe, KS site (Dec 2010 to Jun 2026). Battery figures: manufacturer datasheets, compiled in RG3's white paper, 15 Years of Field Data. Field results describe PD meters as a class, not one brand.

Pricing an iPERL®?

Compare before you switch.

If you are looking at a Sensus iPERL® or iPERL 2 to replace aging SR® II meters, you have another option that stays on your FlexNet® system: a positive displacement meter built so the chamber doesn’t wear.

Weighing static meters against PD? Read what 15 years of field data from the Static Meter Research Project shows.

Stays on FlexNet®Sensus-approved encoder for SmartPoint® radios.
No bolts in the case360° even compression keeps the piston off the wall.
Chloramine-ready seals100% silicone, not nitrile.
Made in the USAShorter lead times.
Why Perpetual

Bolts bend chambers. We removed them.

SR® II style meters lose low flow when uneven bolt torque bends the chamber and the piston starts to rub. The Perpetual case compresses the chamber evenly all the way around, so it doesn’t.

360° compression

Even force on the chamber, no bolts to back off or over-tighten.

Silicone cradle

The chamber sits in 100% silicone, top and bottom.

Oversized outlet gasket

Seals against machined brass to stop bypass.

Holds low flow

No rub means no wear spots and no slow drift.

Questions

Sensus compatibility FAQ.

Can my utility try an RG3 meter before buying?

Yes. Qualified utilities can get their first sample meter for $49 to test on their own system. One per utility. Contact us to request one.

How long does a PD meter last compared to an iPERL?

Field data from American Water and Kansas City Water Services shows most PD meters still testing near 100% accuracy past 25 years in service. A static meter such as the iPERL runs on a sealed battery that Sensus specifies at 20 years in North America and 15 years internationally, and the meter is replaced when the battery ends. In a 15-year side-by-side study in Olathe, Kansas, an iPERL and a Sensus SR II PD meter registered within 0.19% of each other.

Does RG3 make a Sensus-compatible water meter?

Yes. The RG3 Perpetual PD meter (5/8, 3/4 and 1 inch) is sold with a Sensus-approved RG3 Optical Encoder and a Sensus-compatible touch coupler, part EP-TRPL.

Will RG3 meters work with Sensus SmartPoint and FlexNet?

Yes. RG3 Optical Encoders are approved by Sensus for use with SmartPoint® radios, and the touch coupler integrates with the FlexNet® communication network.

Is RG3 an alternative to the Sensus iPERL or iPERL 2?

If you are pricing an iPERL® or iPERL 2 and want to stay on your FlexNet® system, the RG3 Perpetual PD meter with a Sensus-approved encoder is a positive displacement option that reads on the same network. Ask us for a side-by-side quote.

Can I replace Sensus SR II meters with RG3 meters?

Yes. RG3 PD meters use an SR® II style oscillating piston chamber, and some RG3 parts, like the PD housing and ring, also fit Sensus SR series meters. The Perpetual adds a boltless 360° main case so the chamber is not distorted by bolt torque.

What is a touch coupler?

A touch coupler is the pad on the meter lid that a handheld or radio reads through. RG3’s touch coupler is Sensus-compatible and ships ready to plug in.

Is RG3 affiliated with Sensus?

No. RG3 Meter Company is an independent, family-owned manufacturer in Longview, Texas. Sensus, FlexNet, SmartPoint, iPERL and SR II are trademarks of their respective owners.

RG3 Meter Company is not affiliated with Sensus. Sensus, FlexNet, SmartPoint, iPERL and SR II are trademarks of their respective owners.

Upgrade the meter.
Keep your FlexNet® network.